Select Page

Fortus 380 Carbon Fibre Edition

Build Strong, Accurate Tools, Prototypes and Production Parts


The Fortus 380
Carbon Fibre Edition

  • 87% Larger build volume for larger and more parts
  • Heated build chamber to prevent parts curling
  • Superior Material Strength
    133% MORE Carbon Fibres
    47% LONGER Carbon Fibres
  • Prints 2 -5X Faster at Lower Cost
  • Soluble Support allows for complex parts

Learn Why Stratasys Outperforms Markforged
in Carbon-Filled Technology

Get the Facts


FORTUS 380CF – The Truly Professional Carbon Filled 3D Printing

The Fortus 380mc™ Carbon Fibre Edition 3D Printer prints exclusively with FDM Nylon 12CF™ Carbon Fibre and ASA materials. It fills the gap between capability-limited desktop printers and more costly production-level printers enabled with carbon fibre-reinforced materials. The heated build chamber is the same size as the standard Fortus 380mc, preventing warp and curl for consistent part production regardless of size. Soluble support provides complete design freedom for complex shapes that include voids and undercuts.




Layer Thickness: 0.330mm / 0.254mm / 0.178mm / 0.127mm
Support Structure: Soluble
Available Colours: Black / Dark Gray / Light Gray / White / Ivory / Dark Blue / Green / Yellow / Orange / Red

FDM ASA Material Data Sheet Download

FDM Nylon 12CF

Layer Thickness: 0.254mm
Support Structure: Soluble
Available Colour: Black

FDM Nylon 12CF Material Data Sheet Download

System Size and Weight
129.5 cm x 90.2 cm x 198.4 cm
601 kg

Achievable Accuracy
Parts are produced within an accuracy of ± .127 mm (± .005 in.) or ± .0015 mm/mm (± .0015 in/in), whichever is greater). Z part accuracy includes an additional tolerance of -0.000/+slice height. Note: Accuracy is geometry dependent. Achievable accuracy specification derived from statistical data at 95% dimensional yield.

Network Communication
10/100 base T connection. Ethernet protocol.

Operator Attendance
Limited attendance for job start and stop required.

Power Requirements
208VAC 3 phase, 50/60 Hz, 18 Amps

Regulatory Compliance
CE, cTUVus, EAC, FCC Part B

Operating System
Microsoft Windows 10 (Pro, Enterprise, Education), Microsoft Windows 8.1 and Windows 8 (Pro, Enterprise), Microsoft Windows 7 (Pro, Enterprise, Ultimate), Microsoft Windows Server 2012 R2. Insight software requires a 64-bit operating system.

All Fortus® systems include Insight and Control Center job processing and management software. Compatible with GrabCAD Print for use with job reports, scheduling and remote monitoring.