Select Page

The NEW Stratasys J5 MediJet

The all-in-one medical 3D printer.

The new standard for medical modeling.

The Stratasys J5 MediJet™ sets a new standard for medical modeling. With multiple materials and multicolor capabilities, academic medical centers, hospitals and medical device companies can create brilliantly vivid anatomical models and drilling and cutting guides* that are sterilizable and biocompatible – all in one platform.

Service multiple departments with less handling:

Pre-surgical planning

Use patient-specific 3D printed medical models for pre-surgical planning to help improve patient outcomes, patient understanding and consent.

Training & education

Print exact pathology on-demand and train physicians, students and medical device field staff anywhere.

Surgical guides & tooling

Create drilling and cutting guides* that are sterilizable and biocompatible.

Medical device development

Enable clinically relevant benchtop testing and create consistency by 3D printing exact anatomy to use when testing medical devices.

J5 MediJet materials.

Create brilliantly vivid anatomical models and drilling and cutting guides* on demand that are sterilizable & biocompatible.

Biocompatible rigid transparent (MED610)

Transparent, sterilizable, biocompatible material medically approved for bodily contact.

Biocompatible Opaque (MED615RGD™ IV)

Rigid Ivory, sterilizable, biocompatible material medically approved for bodily contact.


Provides unique multicolor capabilities to produce sterilizable, smooth, accurate and realistic models.

DraftWhite (MED837)

Opaque, UV resistant, low-cost model material, which aims to lower the cost of single material applications and bulk color models.

Elastico Clear (FLX934)

Transparent flexible material with Shore A value of 45, with a superior tear-resistant and elongation.

Business impact.

Service multiple departments and create more medical models with less handling — all within a small footprint. Plus, with a lower up-front investment and smaller footprint, MediJet™ is economical and compact enough for small lab spaces.


30% lower cost per part compared to outsourcing.


30% faster print time than comparable printing solutions.


Brilliantly vivid, multi-material and multicolour capabilities.


Model Materials

Biocompatible materials:
Biocompatible rigid transparent (MED610)
Biocompatible Opaque (MED615RGD™ IV)

Rubber like:
Elastico Clear (FLX934)

Flexible clear biocompatible material MED625FLX™

Rigid transparent colours including:

VeroCyanV™ (RGD845)
VeroMagentaV™ (RGD852)
VeroYellowV™ (RGD838)
DraftWhite (MED837)

Digital Model Materials

Unlimited number of composite materials including over 500,000 colours

Support Materials

SUP710™ (Water Jet removable)

Supported Sterilization Processes

Steam (4 minutes at 132 °C), Gamma (25 – 50 kGy),
EtO (specifications available upon request)

Max Part Size/Printing Area

140 x 200 x 190mm (5.51 x 7.87 x 7.48 in.)
Up to 1.174cm2

Layer Thickness

Horizontal build layers down to 18 microns (0.0007 in.)


Deviation from STL dimensions with rigid materials,based on size:
under 100 mm – ±150μ; above 100 mm – ±0.15% of part length.*

Network Connectivity


System Size and Weight

651 x 661 x 1511mm (25.63 x 26.02 x 59.49 in.); 228 kg (503 lbs.)

Operating Conditions

Temperature 18 – 25 °C (64 – 77 °F);
relative humidity 30 – 70% (non-condensing)

Power Requirements

100 – 240 VAC, 50 – 60 Hz, 10A, 1 phase

Regulatory Compliance



GrabCAD Print

Build Modes

High-Quality Speed (HQS) – 18.75µm